To use a Shark Vacuum Robot, place the device on a hard surface with strong Wi-Fi,  and ensure no obstructions. Install the two side brushes and place the device on the dock to charge in...

Maxxair fans have a self-resetting fuse incorporated in the ceiling assembly, on the circuit board. To reset the fan, disconnect its 12V power supply and plug it back in after a few seconds. Turn the...

To reset an Alen air purifier, press and hold the filter reset button for 5 seconds. On Alen Breathesmart models this is the FILTER button, on T300 and T500 it is the RESET button, and on A375 and...

To clean a Maxxair fan, turn it off, disconnect its power supply and disassemble the unit. Use a cloth and soft brush to wipe and scrub the fan blades and screens. Next, lubricate the motor and clean...

To use an AquaOasis humidifier, remove the water tank, fill with water and replace onto the base. Turn on the unit and rotate the dial to adjust mist levels from low to high. To ensure optimum...

To use a ProBreeze dehumidifier, turn it on and locate the control panel. For ProBreeze 20L and 12L models, connect the drain hose. Set the unit's operating mode, fan speed, timer, and relative...