hOmeLabs Dehumidifiers: Cleaning, Set-up And Filter Location

The hOmeLabs dehumidifiers are one of the best for maintaining indoor humidity levels. But to dry your air efficiently it needs a clean filter (not a clogged up one that needs replacing). Unfortunately, finding the filter in a hOmeLabs dehumidifier isn’t always straightforward.

The filter in the hOmeLabs dehumidifier (22, 30, 40, 35, and 50-pints models) is located on the rear side. On the back panel there is a plastic grill with a mesh screen that houses the filter. The filter can be removed by holding the small tab at the bottom of the screen.

This guide explains where the filters and filter reset buttons are in hOmeLabs dehumidifiers, plus a step-by-step guide on how to clean your hOmeLabs dehumidifier.

Filter location

All hOmeLabs dehumidifiers have filters except the small space dehumidifier (HME020018N). These filters are located in the same place on all models, except the 400sq. ft Commercial Grade Dehumidifier.

All hOmeLabs dehumidifiers (excl. commercial grade):

To find the filter on hOmeLabs dehumidifiers:

1. Look at the rear side of the dehumidifier.
2. Locate the grill with a little slot/tab where your fingers can easily fit.
3. Lift the tab at the bottom of the grill and pull it out to remove the filter from the central unit. This plastic filter has a fine mesh screen.

Location of Filter on hOmeLabs 400sq. ft Commercial Grade Dehumidifier:

1. Pull out the louver on the front panel to gain access to the filter.
2. Take out the filter. The filter in this commercial grade dehumidifier is a separate fine plastic mesh, unlike other hOmeLabs models.

How to reset a hOmeLabs Dehumidifier

All hOmeLabs dehumidifiers need to be reset after cleaning or changing the filter, or after 250 hours of operation.

The check filter light will come on as a reminder to clean the filter, and will begin to flash after 250 hours of operation.

To reset your hOmeLabs dehumidifier after cleaning the filter, press the filter button and the light will go off.

Location of the Filter Reset Button on hOmeLabs Dehumidifiers

The location of the filter reset button varies depending on the model. Use the table below to find your model, and its filter reset button location:

hOmeLabs Dehumidifier Model	Filter Reset Button Location
hOmeLabs 1,500 sq. ft Dehumidifier	Between COMFORT and CONT. button
hOmeLabs 3000 sq. ft Dehumidifier	Left to CONT. button
hOmeLabs 3500 sq. ft Dehumidifier with Pump	The first button on the left side of the digital control panel
hOmeLabs 4000 Sq. Ft Energy Star Dehumidifier-with Pump	The first button on the left side of the digital control panel
hOmeLabs 4500 sq. ft Dehumidifier	Between COMFORT and CONT. button
hOmeLabs 4500 sq. ft Dehumidifier with Pump	Between COMFORT and CONT. button
hOmeLabs 150 sq. ft Small Space Dehumidifier	No filter

How to Clean a hOmelabs Dehumidifier and Filter

The following cleaning guide is for all hOmeLabs dehumidifier models. If you own a small space dehumidifier skip the filter cleaning step, as it doesn’t have a filter.

Please switch off the dehumidifier and unplug it before cleaning

1. Clean the outer case and grills

• Wipe the outer side of the unit with a damp cloth.
• The air inlet and outlet easily get soiled and need special attention while cleaning. You can clean them using a brush or a vacuum attachment.
• Never allow the water to splash directly onto the central unit as it may result in rusting or electric shock as you plug the device again, causing the insulation failure of the unit.

2. Clean the Bucket

• Locate the water bucket at the lower half of the front panel. Remove it by gently pulling it out.
• Discard the water in the bucket. It has a splash guard that ensures water does not drip as you take the water bucket out.

3. Clean the Filter

• Remove the filter and wash it with potable water (The small space dehumidifier is filterless, so these steps are not required for cleaning it).
• Once the filter is clean, air dry it and insert it back inside the unit. You need to clean the filter once every 30 days.
• You need to reset the filter using the filter reset button after reinstalling the filter in the central unit. The filter light starts flashing automatically after every 250 hours of operation to remind you that it’s time to clean the filter. Remember commercial grade dehumidifiers don’t need to be reset.
• To reset the filter, press the filter button once, and the flashing light will go off.
• Your dehumidifier is ready for use again.

Deep Cleaning

If your dehumidifier unit needs deep cleaning, you can use mild detergents for proper cleaning. HOmeLabs strictly prohibits using bleach or any abrasives for cleaning the dehumidifiers.

For deep cleaning of the filter:

• Take out the filter from the central unit. Run tap water gently over the filter.
• Use a brush and a mild detergent to clean the filter. After applying detergent, rub the surface carefully with the brush to remove dust and other trapped particles inside the filter.

For deep cleaning of the water bucket:

• Pull out the water bucket and discard water from it.
• Clean the inner side of the bucket using lukewarm water, a mild detergent, and a soft brush.
• After applying detergent, rub the surface gently and rinse the water bucket with clean water.
• Repeat this every two weeks for efficient operation.

How to use a hOmeLabs dehumidifier

To use a hOmeLabs dehumidifier:

• The hOmeLabs dehumidifier might be tilted or placed upside down during shipping. Before initial use let the device stand upright before plugging in for at least 24 hours for optimal operation.

• Install an appropriate sized drain hose (optional).

• Plug in the device and the LED panel will light up.

• Press the power button and the unit will start running in the continous mode by default.

• You can also set the timer and humidity levels using the arrows – Exit the continuous (or comfort mode) mode by pressing CONT. button as the humidity setting is invalid in this mode and the arrows are disabled.

• Enjoy ideal, healthy humidity levels.

Types of hOmeLabs Dehumidifiers

If you aren’t sure what type of hOmeLabs dehumidifer you have, or if you are looking to buy a new one, you can use the guide below to find the right one.

All Homelabs dehumidifiers are Energy Star certified and use cutting-edge technology to save energy. Being Energy Star certified means that these dehumidifiers deliver more value in terms of energy conservation and less cost.

According to Energy Star, this means Homelabs dehumidifiers can

remove the same amount of moisture as a similarly sized conventional unit but use nearly 15% less energy.

1. hOmeLabs 1,500 sq. ft Dehumidifier

The hOmeLabs 1500 sq. ft Energy Star certified dehumidifier can effectively remove 22 pints of water from the atmosphere daily.

Features:

• 0.8-gallon water capacity
• 50 dB noise level
• Built-in wheels and handles
• 1-year warranty
• Optional drain hose outlet
• Continuous 24-hour cycle
• Automatic shut-off

2. hOmeLabs 3000 sq. ft Dehumidifier

The hOmeLabs 3000 square feet dehumidifier has a powerful dehumidifying capacity of 35 pints of water per day.

Features:

• 1.6-gallon water capacity
• Quiet operation (50 dB)
• Portable
• Continuous 24-hour cycle
• Automatic shut-off
• Optional drain hose outlet
• One-year warranty

3. hOmeLabs 3,500 sq. ft Dehumidifier With Pump

The hOmeLabs 3500 sq. ft dehumidifier comes with a pump for convenient continuous draining. It can remove up to 40 pints of water per day.

Features:

• 49 dB noise level
• Built-in wheels and handles
• 1-year warranty
• Digital control panel
• Optional drain hose outlet
• 24-hour timer
• Automatic shut-off
• Defrost function.

4. hOmeLabs 4000 sq. ft Dehumidifier With Pump

The hOmeLabs 4000 sq. ft dehumidifier is an Energy Star-rated dehumidifier that can remove up to 50 pints of water a day.

Features:

• 0.8-gallon water capacity
• 53 dB noise level
• Built-in wheels and handles
• 1-year warranty
• Optional drain hose outlet
• Continuous 24-hour cycle
• Automatic shut-off

5. hOmeLabs Commercial Grade 4000 sq. ft Dehumidifier With Pump

The hOmeLabs commercial grade 4000 sq. ft dehumidifier has a remarkable dehumidifying capacity of 140 pints per day, which makes it suitable for offices, industrial spaces, gyms, garages, and large rooms.

Features:

• Built-in pump
• 50 dB noise level
• Portable(Two built-in handles, two cord hooks, two mobile casters, and two rubber wheels)24-hour timer
• Digital control panel
• Automatic shut-off
• Optional drain hose outlet (Includes a 5m long drain hose)
• One-year warranty

6. hOmeLabs 4500 sq. ft Dehumidifier

The hOmeLabs 4500 sq. ft dehumidifier comes with a powerful dehumidifying capacity(50 pints) and state-of-the-art design that can fit into any modern office or home perfectly.

Features:

• 1.6 gallon water capacity
• 50dB noise level
• Built-in handles, and wheels
• One year warranty
• Automatic moisture level adjustment
• Auto shut-off and auto restart
• Defrost function
• 24-hours continuous cycle

7. hOmeLabs 4,500 sq. ft Dehumidifier With Pump

The hOmeLabs 4500 sq. ft dehumidifier can remove 50 pints of water per day, making it suitable for large rooms.

Features:

• 3-gallon water tank
• Built-in pump
• 50 dB noise level
• 24-hour timer
• One-year warranty
• Portable
• Auto control feature
• Overheating protection

8. hOmeLabs 150 sq. ft Small Space Dehumidifier

The hOmeLabs features a fantastic small space dehumidifier with a dehumidifying capacity of 250ml per day, making it perfect for small spaces.

Features:

• 500ml water tank
• 50 dB noise level
• Auto Shut off function
• One-year warranty
• Thermoelectric and portable device
• Energy efficient 25W ETL certified adapter